My next project cost me about $6. I found a shipping pallet on craigslist. I did by two new 2x4s, but it's mainly free recycled wood. I followed these basic plans, but I altered quite a bit to minimize the tearing down of the pallet.
Friday, June 11, 2010
Saturday, May 29, 2010
Here is the toddler bed after I distressed it. The pictures don't do the bed justice. It looks a lot amazing in person. It has an old/new looking finish.
These pictures aren't very good. I forgot to adjust the white balance, so the bed looks a different color in evey picture. :)
My newest project. An outdoor storage bench.
I'll probably make another post about it when it's finished.
I'm pretty excited about it. It's made partly out of recycled wood from a local recycling center.
Friday, May 28, 2010
It all started when my son's crib got recalled. At 15 months old, I wasn't wanting to buy a new crib.The next day I saw the cutest pink toddler bed on knock-offwood.com. It sounded like a fun project, and it was only going to cost us about $60.
We made it the next weekend. I had so much fun making it. I think I'm addicted to building now. I'm currently on my 3rd project right now.
Anyway, here is the toddler bed...
I did a little more work on it this past week. I decided to give it a little more distressed look and add a clear finish. It's beautiful. I love it. I'll have to take more pictures of it.
I posted these pictures on my baby blog, and I got a request for measurements. Ana over at knock-off wood did a great job designing the plans for this toddler version of her farmhouse bed, but her design made a bed that was only 26" wide (which is a problem because our mattress is just under 28" wide). I also wanted to make the bed as close as possible to that adorable pink bed without painting it pink.Here are my measurements...
Cut List for the Headboard
A) - 1x4 @ 1 " (Center Panel)
B) 2 - 1x3 @ 18 1/2" (Side Pieces for Center Panel)
C) 2 - 1x @ 2 " ( , headboard trim - cut 2 if you do not want a arch)
D) 1 - 1x6 @ 26" (Cut to measurement, headboard header, use 1x2 if you do not want arch)
E) 2 - 1x2 @ 1" (Inside Leg Pieces)
F) 2 - 1x2 @ 3" (Full Legs)
G) 1 - @ " (Top of Panel and Legs)
H) 1- 1x @ 3 " (Top of Headboard)
I) 2 - 1x2 @ 6" (Cut to measure, Inside bottom Leg Pieces)
Cut List for Footboard
J) - 1x4 @ " (Center Panel)
K) 2 - 1x3 @ 9" (Side Pieces of Center Panel)
L) 2 - 1x @ 2 " (Trim for the center panel, )
M) 4 - 1x2 @ 1" (Legs)
N) 1 - @ " (Top of the Panel and Legs)
O) 1 - 1x @ 3 " (Top of the Footboard)
P) 2 - 1x6 @ 54 1/2" ( Side Rails)
Q) 1- 1x6 @ 2" (Endplate)
R) 2 - 1x2 @ 53 1/2" (Cleats)
S) 18+ - 1x2 @ 2" (Slats)
I highlighted the numbers that I changed. I made the bed 2" wider, so I decided to make it an inch taller as well. I also used the boards pictured in the pink bed (1x3 for trim instead of 1x2. 2x3 for the top of the panel and legs instead of the 1x2).
The bed is currently at my in-laws house drying, so these measurements were all from memory. I believe the measurements are accurate, but I make no promises. I will measure everything later in the week.I do know that I used 8 1x4s for the panel, and that it is 28" total. The 1x4 are 3.5" wide... in case you were wondering. I also know that I added an inch to the height. After you cut the 8 panel pieces, the inside leg and the outside leg, lay everything out an measure for the trim and top pieces. It will give everything a perfect fit, and it will make sure the numbers I gave are right.
I also didn't have a a brads nailer (but I do now!), so we screwed everything instead. Okay, I lied. I didn't screw in the slats. I old fashioned hand nailed those. A brad nailer will give the trim a cleaner look, but I still like how the screws are visible.Let me know if you have any questions!
I might post pictures soon, but I just finished a twin version of this bed! The plans our found here. The measurements were great, but I made legs shorter because the bed isn't going to have a boxspring. This (an outdoor storage bench) is my current project.
Monday, March 29, 2010
2. For my small family, I cut the recipe in half. Instead of making a 9x13 lasagna, I make two 8x8.3. Before filling the casserole dish, line the dish with plastic wrap. You could also use foil or wax paper, but just remember that foil can sometimes tear easily.
4. Cool the dish in the refrigerator before freezing. It will help the dish freeze faster and keep the food fresh. Although, I sometimes skip this step if the food is already room temperature.5. After the casserole is frozen solid, remove it from the glass and plastic. This will free up your dishes, and I also like making sure the plastic isn't frozen into the food.
6. Wrap the casserole with plastic wrap. Make sure you wrap it tightly and label it (what it is, the date, and baking instructions).
Last night I made lasagna. I used this recipe, and I also added pepperoni to the sauce (because that is what my mom does). I doubled the recipe and then divided it by 4.
Here are some other good layered dishes.
Sunday, March 28, 2010
Right now, I'm learning about cooking and eating healthier. We just bought a chest freezer, and I already have over 15 homemade meals in the freezer waiting. I'm even debating adding this to my "learning as I go" things to blog about.
Monday, January 18, 2010
This lesson was mainly about using available light without the flash indoors.When taking pictures inside my house (especially in the winter), I almost always have to sacrifice my ISO, shutter speed, or depth of field (and sometimes all three).
When ISO gets sacrificed, the pictures get "noisy" and grainy.When shutter speed is too low, there is often camera shake or motion blur.
I usually sacrifice my DOF first, but the smaller the DOF the harder it is to keep a mobile baby in focus. It's also hard to sacrifice your DOF when your lens doesn't let you! The Canon Rebel kit lens only goes down to f/3.5 when zoomed all the way out.I love my 50mm f/1.8 because it gives me more flexibility indoors.
When shooting indoors you want to find and use as much natural light as you can. Open those windows!
(He decided to get as close as possible.)
(ISO 1600, SS 1/80, f/2.2 in AV)
Wednesday, January 13, 2010
Tip #1 -- Keep it Simple.
Tip #2 -- Apply the Rule of Thirds
Tip #3 -- Keep an Eye on the Horizon
Tip #4 -- Frame your Subject
Tip #5 -- Fill the Frame
Tip #6 -- Try a New Perspective
And remember beauty is in the eye of the beholder and rules are made to be broken!
And this weeks challenge was to consider one or more of the following as you compose your photo(s).
Here are some of my attempts at art... don't laugh.
Here are some more composition tips!